nonnavClarity on site.
Excavator Grade Assist Interactive demo · v0.3.1
中文
01 / Level grading

A reference for every pass.

Set the target elevation and watch the tooth-to-design offset.

Ready to work

Loading the 3D work scene…
Tooth position
Cyan grid · Design surfaceDrag to orbit · Scroll or pinch to zoom
Jump to
00:00 / 00:30

Explore a complete work cycle

Select a scenario, set the target parameters and play. The cyan grid is the design surface. The reading is the vertical offset between the teeth and the target at their current position.

  1. Drag to orbit; scroll or pinch to zoom. Use Side view to inspect the offset.
  2. Scrub the timeline to review the work. Reset restores the original terrain.
  3. Expand manual controls to adjust the boom, stick and bucket independently.
  4. Hover over an equipment number to read its role (tap on touchscreens). Setup and calibration illustrate the steps only.

Positive: above target. Negative: below target. The green ±0.03 m band is a demo threshold, not a claim of equipment accuracy.